top of page

Can I Have a Woodburner If I Don't Have a Chimney?

4 hours ago
4 min read
Can I Have a Woodburner If I Don't Have a Chimney?

One of the biggest misconceptions we hear about woodburners is:

“We'd love one, but we don't have a chimney.”

The good news?

You don't necessarily need one.


A traditional masonry chimney is only one way of safely taking the combustion gases from a woodburning stove out of your property.

If your home doesn't have a chimney, it may still be possible to install a stove using a twin-wall insulated flue system.

And that opens up considerably more possibilities than many homeowners realise.


What is a twin-wall flue?

A twin-wall chimney system is a manufactured insulated flue designed to create a chimney where there isn't an existing suitable masonry chimney.

As the name suggests, the system consists of an inner and outer metal wall with insulation between them.

This helps keep the flue gases warm as they travel through the system and allows the chimney to pass safely through or alongside different parts of the building when installed in accordance with the manufacturer's requirements and Building Regulations.

The result is that your stove doesn't necessarily need to sit against an existing chimney breast.


Where can a twin-wall flue go?

There are several possibilities.

A system might travel vertically from the top of the stove, through the ceiling and roof.

Alternatively, depending on the property and installation design, the flue may pass through an external wall before continuing vertically up the outside of the building.

The correct route depends on the layout of the property, the position of windows and rooflines, combustible materials and the manufacturer's requirements.

This is why we can't sensibly design a twin-wall system simply by asking, “How tall is the house?”

We need to see the property.


Does that mean I can put the stove anywhere?

Not quite.

A twin-wall system gives us considerably more flexibility, but there are still rules governing where the stove and chimney can be positioned.

We need to consider things such as:

  • distances from the stove and flue to combustible materials;

  • the route through floors, ceilings or walls;

  • chimney termination height;

  • proximity to windows and openings;

  • roof construction;

  • access for installation;

  • hearth requirements;

  • and the manufacturer's installation instructions.

The shortest route isn't always the correct route.

And the route that looks simplest from inside the room may become considerably more complicated when we look at what's happening outside or above it.


Are twin-wall systems only for modern houses?

Definitely not.

We install them in all sorts of properties.

They're particularly useful for extensions, conservatories, garden rooms and open-plan spaces where there simply isn't an existing chimney in the place where the customer wants the stove.

They can also work beautifully in older properties.

A freestanding contemporary stove with a black flue rising vertically above it can become a real feature rather than something you're trying to hide.

This is particularly effective with taller Scandinavian-style appliances from manufacturers such as HWAM, WIKING and RAIS.


Can I use an existing twin-wall chimney?

Potentially – but this is where things can become complicated.

We often hear:

“There's already a metal chimney there, can't you just connect the new stove to it?”

Sometimes we can.

But frequently the homeowner doesn't know who manufactured the existing system or exactly what components have been used.

Twin-wall chimney components are not universally interchangeable.

Different manufacturers have different jointing systems, dimensions and approved components. We therefore can't simply take a component from one manufacturer and connect it to an unidentified system because it happens to look similar.

If an existing system can be positively identified, inspected and confirmed as suitable, there may be options.

If it can't, replacing the system can sometimes be the only appropriate route.


Is a twin-wall flue more expensive than using an existing chimney?

Usually, yes.

If you already have a suitable masonry chimney, installing an appropriate flexible liner can often be less involved than constructing an entirely new chimney system.

Twin-wall installations require multiple manufactured components – lengths, supports, brackets, fire-stop components, terminals and potentially roof or wall penetrations.

The exact cost depends heavily on the route.

A simple single-storey installation is very different from taking a chimney through two floors and a roof or several metres up the outside of a building.

That's why we quote the actual installation rather than offering one generic twin-wall price.


Do I still need a hearth?

Yes.

Not having a chimney doesn't remove the other installation requirements surrounding a solid-fuel appliance.

The stove will still need an appropriate hearth and must comply with the relevant distances to combustible materials.

Depending on the appliance, that could mean a relatively discreet glass or slate hearth beneath a contemporary freestanding stove, or something more substantial.

Again, the stove itself determines many of these requirements.


A stove without a chimney can look fantastic

One of the advantages of starting without an existing fireplace is that you aren't restricted by what's already there.

Rather than trying to squeeze a stove into an opening, you can sometimes design the entire feature around the appliance.

A tall Scandinavian stove against a simple wall.

A contemporary stove on a slate hearth.

A freestanding appliance in an extension with the black flue running vertically through the roof.

These can be some of the cleanest-looking installations we do.


Don't rule out a woodburner because you don't have a chimney

If you've assumed your house can't have a woodburner because there's no chimney breast, send us some photographs.

Ideally, we'd like to see the proposed position of the stove, the room, the outside wall and the roof above.

From those photographs, we can usually start to understand whether a twin-wall system is likely to be feasible and what might be involved.

You may have far more options than you thought.


Southwest Woodburners | Dorset Woodburning Stove Showroom, Stove Supply & HETAS Installation Specialists

Comments


bottom of page